• Altitude: -1000m to +8200m, resolution 0,1m. At launch the GPS module provides an automatic altitude setting (AMSL)


• Vario: Digital indication from –99.0m/s to +99.0m/s Analogue indication from 0 to 5m/s and from 5 to 9,5 m/s. Acoustic signal for climbing initiates at +0.1m/s. This may be switched off. Acoustic signal for sink can be set to initiate between –0.1m/s and –5m/s. Settings in MENU/SETTINGS/VARIO From –5m/s a sink alarm will be heard regardless of settings


• Speed: (Only with speed sensor connected) 0 – 160km/h Total-Energy-Compensation (TEC) 0 – 90%


• Temperature: The sensor is placed on the right hand side of the instrument. It measures in centigrade from –25 to +75 degrees, resolution 0.1 degrees


• GPS receiver: 16 channel parallel, 2D/3D position (WGS84), Altitude, speed, direction. Internal aerial.


• Data transfer protocols: serial, cable, infrared


• Clock: Flight recording in UTC. Display shows local time and elapsed time since launch


• Memory Flight data: 145 hours every second, 224 waypoints, 10 routes


• Memory G-force data: up 14 hours, 15 or 60 tims per second, 1 or 3 axis


• Power supply: Rechargeable Li-Ion 3.7V/1200mAh. Operating time per charging app. 40 hours. The instrument is equipped with an “intellicharge” system. To protect the Li-Ion battery the XC-Trainer will shut itself down when before the battery is completely flat, saving all flight data beforehand. Dimensions: 137x66x28mm, weight including battery 150g Software analysis in TN-Complete

XC-Trainer / XC-Trainer 3DG > Upper Display Description

1. 1. Ratio left/right thermaling
2. 2. Wind direction
3. 3. Windspeed
4. 4. Groundspeed (SOG)
5. 5. Altitude
6. 6. Climb/sink rate
7. 7. Acoustic signal volume
8. 8. Heading (COG)
9. 9. Speed distribution curve beneath the wind rose and the SOG bar

XC-Trainer / XC-Trainer 3DG > Lower Display Description

1. 1. LOW BATT symbol
2. 2. TAS (TRUE AIRSPEED)
3. 3. Resolution
4. 4. Pilot position
5. 5. Narrow heading indicator
6. 6. Position Mark symbol
7. 7. Waypoint symbol
8. 8. WPT cylinder depiction
9. 9. Distance to chosen WPT, MARK or to the launch
10. 10. Flashing indication pointing to the chosen WPT or MARK
11. 11. Local time